Swipe to the left

Understanding how to remove and replace your strong home depot magnetic vent cover is really important. Even though each of these processes is quite simple, doing it wrongly could mess it all up.

In this post, we will look at how to remove and replace a strong magnetic vent cover. To make it easier to understand, we will discuss the different processes individually. At the end of this post, you should be able to remove a home depot magnetic vent cover by yourself.

Removing the magnetic vent cover

There are several reasons why you would want to remove a magnetic vent cover. The most common reasons are replacement, decoration, or the incorporation of a filter.

In reality, this process is not difficult. Having the right tools make it all too easy. Let’s go through the different stages of the process. To see this through, you need any of the following:

  • A screwdriver or drill
  • Needle nose pliers

Each of these tools signifies a different stage of the process.


First Step – Using a Screwdriver or drill

To begin the process, you will need to firstly, look at the screws holding the strong magnetic vent cover in place. The screws are usually at the top of the vent cover and there are usually just two of these screws.

Looking at the screws will help you determine which type of screwdriver you need. As you know, it could be any of a flathead screwdriver or a Phillips head screwdriver. You will have to determine this because the vent cover screws are peculiar.

Once you have this figured out, the rest of the process is pretty simple. All you need to do is begin taking out the screws using your screwdriver. In less than no time, your home depot magnetic vent cover will be off.

Second Step – Making use of a pair of needle-nose pliers

In certain cases, what you need isn’t a flathead or Phillips head screwdriver. What this implies is that neither would be instrumental in getting the cover out. You need to look elsewhere to remove your magnetic vent cover.

Normal practice has revealed that when this occurs, what you are dealing with are stripped screws. The question that comes to mind at this point is, “what do you do?” Your tool of choice at this point will be a pair of needle-nose pliers.

Did you just wince at the thought of using these? Don’t worry, it should be just as easy as using a screwdriver. Simply use the pliers to grip the screw as firmly as possible. After gaining a firm grip, begin turning the screw in an anticlockwise direction.

Keep at this till the vent cover finally comes off.

Final Step – Rounding up

In reality, this isn’t a step. It is just a piece of advice. After the screws have been removed and the vent cover is taken off, what next? Gather all the screws together and keep them in a safe place. The reason for this is that they might come in handy later.

Replacing a magnetic vent cover

We have already stated that one of the reasons why you will take out a vent cover is replacement. Since you have learned about the removal process, it is only wise to learn how to replace it as well. The two main reasons for replacement are decoration and getting a new cover to replace an old one.

One other reason why you may decide to replace your strong magnetic vent cover is when it starts to heat up. If you take out the cover and leave it without a replacement, you are breeding an accident waiting to happen.

Before going through the different steps involved in the replacement, you should know the process is quite cheap. You also have to efficiently clean the vents before covering them up.

First Step – Get the things you need

To carry out the replacement of your home depot magnetic vent cover easily, you need:

  • Tape measure
  • Plastic screw anchors
  • Screwdriver
  • Replacement vent
  • Mounting screws (mostly included with your vent)
  • Vacuum

Second Step – Take out the magnetic vent cover

This step has already been thrashed earlier in this post. It is a very simple process which just requires you to unscrew the strong magnetic vent cover. You could make use of a screwdriver or a pair of nail pliers. It might require some wiggling if it is a bit stiff.

On the other hand, you may try using a flathead screwdriver to pry the edges of the vent cover. Wearing a pair of gloves is advisable to keep you safe from injury.

Third Step – Take measurements of the magnetic vent cover to achieve the appropriate size

A vent may be on the floor or in the ceiling, regardless of where it is located, it should be measured. The proper dimensions are required so that you will find it easy to replace the removed vent.

You should take the dimensions of the inner part of the vent rather than the outside. Some people prefer to replace old vent covers using decorative home depot magnetic vent cover. The only disadvantage of this is that you may need to get enough to cover the rest of your home.

Fourth Step – Clean out the vent

We can emphasize enough how important this step is. Usually, this process will expose a lot of items that should not be there. Try to clean the vent as much as possible.

The vacuum will be instrumental to suck out all the unwanted dust after the objects have been removed. Ensure that the vacuum hose reaches down as much as you can.

Fifth Step – Put the anchors in

This step is not usually necessary, however, the existing holes will be a determinant. If you notice that the existing holes are too large, then it is imperative that you put anchors in. This is because they might end up too large for the new screws that are coming.

The anchors are your insurance to ensure that your new strong magnetic vent cover holds in place. Sometimes, you may be required to drill first if you notice that new screws are bigger than the old ones.

Final Step – Put in the new vent cover

Simply put in the new magnetic vent cover to replace the old one. It is important that to ensure that the new cover sits well, you work on the ductwork. You may need to bend the ductwork or widen the hole.

Conclusion

By now you must have concluded that removing or replacing your magnetic vent cover is easy. Just follow the processes above and it’ll be as easy as you read it. You can consider a home depot magnetic vent cover as a replacement for your old vent cover.

By Trendebut 5 years ago 1966 Views No comments

Subscribe our newsletter
10% OFF Coupon
Contact service@trendebut.com if you fail to get coupon.